Enum: HMI Command - v1.0

Name	Type	Value	Description
HMI_CMD_00000_NIL	UInt	0	HMI Command: 00000 - No action; Mode=Clear; Area=Any
HMI_CMD_00001_ON_OFF	UInt	1	HMI Command: 00001 - On/Off; Mode=E/D-Pulse; Area=Any
HMI_CMD_00002_OM_STOP	UInt	2	HMI Command: 00002 - Stop mode; Mode=S-Pulse; Area=Operating mode
HMI_CMD_00003_OM_MAINT	UInt	3	HMI Command: 00003 - Maintenance mode; Mode=S-Pulse; Area=Operating mode
HMI_CMD_00004_OM_MANUAL	UInt	4	HMI Command: 00004 - Manual mode; Mode=S-Pulse; Area=Operating mode
HMI_CMD_00005_OM_SEMI	UInt	5	HMI Command: 00005 - Semiautomatic mode; Mode=S-Pulse; Area=Operating mode
HMI_CMD_00006_OM_AUTO	UInt	6	HMI Command: 00006 - Automatic mode; Mode=S-Pulse; Area=Operating mode
HMI_CMD_00007_MAINT_MOV	UInt	7	HMI Command: 00007 - Maintenance movement; Mode=E/D-Pulse; Area=Operating mode
HMI_CMD_00008_MANUAL_MOV	UInt	8	HMI Command: 00008 - Manual movement; Mode=E/D-Pulse; Area=Operating mode
HMI_CMD_00009_SEMI_STEP	UInt	9	HMI Command: 00009 - Semiautomatic step; Mode=E/D-Pulse; Area=Operating mode
HMI_CMD_00010_AUTO_CYCLE	UInt	10	HMI Command: 00010 - Automatic cycle; Mode=E/D-Pulse; Area=Operating mode
HMI_CMD_00011_ERROR_ACKN	UInt	11	HMI Command: 00011 - Error acknowledgement; Mode=S-Pulse; Area=Any
HMI_CMD_00012_EMRG_ACKN	UInt	12	HMI Command: 00012 - Emergency acknowledgement; Mode=S-Pulse; Area=Safety
HMI_CMD_00013_LAMP_TEST	UInt	13	HMI Command: 00013 - Lamp test; Mode=While; Area=HMI
HMI_CMD_00014_SILENCE	UInt	14	HMI Command: 00014 - Silence acoustic signals; Mode=E/D-Pulse; Area=HMI
HMI_CMD_00015_REFERENCE	UInt	15	HMI Command: 00015 - Reference command
HMI_CMD_00016_EXE_SEMI_STEP	UInt	16	HMI Command: 00016 - Execute semiautomatic step; Mode=S-Pulse; Area=Any
HMI_CMD_00017_LOAD_AJUST	UInt	17	HMI Command: 00017 - Load adjust (position, speed, ramp, etch)
HMI_CMD_00018_LOAD_TEMPORAL	UInt	18	HMI Command: 00018 - Load temporal values to be processed
HMI_CMD_00019_SIMULATE	UInt	19	HMI Command: 00019 - Enable/Disable simulation
HMI_CMD_00020_RESET_CYCLE	UInt	20	HMI Command: 00020 - Reset cycles; Mode=S-Pulse; Area=Any
HMI_CMD_00021_REQUEST	UInt	21	HMI Command: 00021 - Request; Mode=S-Pulse; Area=Any
HMI_CMD_00022_RESTART	UInt	22	HMI Command: 00022 - Restart; Mode=S-Pulse; Area=Any
HMI_CMD_00023_YES	UInt	23	HMI Command: 00023 - Ok/execute/continue/accept; Mode=S-Pulse; Area=Any
HMI_CMD_00024_CANCEL	UInt	24	HMI Command: 00024 - Cancel/exit; Mode=S-Pulse; Area=Any
HMI_CMD_00025_READ	UInt	25	HMI Command: 00025 - Read; Mode=S-Pulse; Area=Any
HMI_CMD_00026_WRITE	UInt	26	HMI Command: 00026 - Write; Mode=S-Pulse; Area=Any
HMI_CMD_00027_RELEASE	UInt	27	HMI Command: 00027 - Release; Mode=S-Pulse; Area=Any
HMI_CMD_00028_REPLACE	UInt	28	HMI Command: 00028 - Replace; Mode=S-Pulse; Area=Any
HMI_CMD_00029_LOAD_FACTORY	UInt	29	HMI Command: 00029 - Load factory settings
HMI_CMD_00030_ON	UInt	30	HMI Command: 00030 - On/start/run; Mode=S-Pulse; Area=Any
HMI_CMD_00031_OFF	UInt	31	HMI Command: 00031 - Off/stop; Mode=S-Pulse; Area=Any
HMI_CMD_00032_SET	UInt	32	HMI Command: 00032 - Set value
HMI_CMD_00033_CLEAR	UInt	33	HMI Command: 00033 - Clear value
HMI_CMD_00034_MANUAL_FWD	UInt	34	HMI Command: 00034 - Manual movement forward; Mode=While; Area=Any
HMI_CMD_00035_MANUAL_BWD	UInt	35	HMI Command: 00035 - Manual movement backward; Mode=While; Area=Any
HMI_CMD_00036_USE_MANUAL_SPEED_K	UInt	36	HMI Command: 00036 - Use constant for manual speed
HMI_CMD_00037_USE_MANUAL_SPEED_V	UInt	37	HMI Command: 00037 - Use variable for manual speed
HMI_CMD_00038_AUTO_ENABLE	UInt	38	HMI Command: 00038 - Enable/disable auto-enable
HMI_CMD_00039_HOLD_PNEUMATIC_POS_WITH_SENSORS	UInt	39	HMI Command: 00039 - Hold pneumatic position with sensors
HMI_CMD_00040_MANUAL_BUTTON_FEATURES	UInt	40	HMI Command: 00040 - Manual movement, press option. 0=move while is pressed; 1=Toggle movement
HMI_CMD_00041_MANUAL_SENSOR_FEATURES	UInt	41	HMI Command: 00041 - Manual movement, sensor option. 0=Stop when sensor changes, 1=Don’t check sensors
HMI_CMD_00042_ABSOLUTE_POSITIONING	UInt	42	HMI Command: 00042 - Absolute positioning
HMI_CMD_00043_RELATIVE_POSITIONING	UInt	43	HMI Command: 00043 - Relative positioning
HMI_CMD_00044_SYNC	UInt	44	HMI Command: 00044 - Sychronization command
HMI_CMD_00045_BYPASS	UInt	45	HMI Command: 00045 - Bypass command
HMI_CMD_00046_SEARCH	UInt	46	HMI Command: 00046 - Search command
HMI_CMD_00047_RETRY	UInt	47	HMI Command: 00047 - Retry command
HMI_CMD_00048_STOP_CPU	UInt	48	HMI Command: 00048 - Stop CPU command
HMI_CMD_00049_RUN_CPU	UInt	49	HMI Command: 00049 - Run CPU command
HMI_CMD_00050_CONTINUE	UInt	50	HMI Command: 00050 - Continue command
HMI_CMD_00051_EMPTY	UInt	51	HMI Command: 00051 - Empty command
HMI_CMD_00052_LOG	UInt	52	HMI Command: 00052 - Enable/Disable Log
HMI_CMD_00053_ENABLE	UInt	53	HMI Command: 00053 - Enable/Disable (general)
HMI_CMD_00054_ENABLE_INPUT	UInt	54	HMI Command: 00054 - Enable/Disable Input
HMI_CMD_00055_FORCE	UInt	55	HMI Command: 00055 - Force